Unidad de almacenamiento NAS QNAP 2-bay 3.5" SATA HDD USB 3.1 Gen2 10Gbps type-C hardware RAID external enclosure. USB-C to USB

CPUMicroprocesador con hardware RAIDBahía para unidades2 unidades SATA de 3,5" a 6Gb/s, 3Gb/sEl sistema se envía sin unidad de disco duro.Para ver la lista de compatibilidad de discos duros.Compatibilidad de unidadesUnidades de disco duro SATA de 3,5"a 6Gb/s y 3Gb/sUnidades de disco duro SATA de 2,5" a 6Gb/s y 3Gb/sUnidades de estado sólido SATA de 2,5" a 6Gb/s y 3Gb/sYou can only use one disk type (HDD or SSD) in a RAID group. Combining different types of disk in one RAID group is not supported.TR-002 does not support the QDA-A2AR/ QDA-A2MAR.Intercambiable en calientePuerto USB 3.2 Gen 2 (10 Gbps)1 puerto USB 3.2 Gen 2 Tipo-CFormatoTorreDimensiones (Altura x Anchura x Profundidad)168.5 × 102 × 219 mmPeso (neto)1,37 kgNúmero máx. de unidades de disco duro/SSD compatibles2Tipo de unidad de disco duro2 unidades SATA de 2,5" o 3,5" a 6Gb/sTemperatura operativa0 - 40 °C (32°F - 104°F)Storage Temperature-20 - 70°C (-4°F - 158°F)Humedad relativa5 ~ 95 % de humedad relativa sin condensación, bulbo húmedo: 27 ˚C (80,6 ˚F)Unidad de alimentación eléctricaAdaptador de alimentación externo, 36W, 100-240 VConsumo de energía: Modo suspensión de disco duro:2,98 WConsumo de energía: Modo de funcionamiento, típico10,15 WProbado con unidades totalmente llenas.Ventilador1 de 70 mm, 12 V de CCNivel de sonido17,8 db(A)Advertencia del sistemaTimbreSystem modesIndividual, JBOD, hardware RAID 0/1, Software control (Software control requires a QNAP NAS or Windows/macOS utility)Note: You can only use one disk type (HDD or SSD) in a RAID group. Combining different types of disk in one RAID group is not supported.FeaturesDisk modes: Individual, JBOD, RAID 0, RAID 1.System, fan, and drive failure monitoring with LED and audio alerts.System sleep* during USB cable disconnection and host device hibernation** or shut down.*RAID rebuild delays the sleep.**Some hosts may not be supported.Minimum system requirementsQNAP NAS or PC with a USB Type-A or Type-C portMinimum operating system requirementsQNAP NAS: QTS 4.3.6 (or later)Windows: Windows 7 (or later), Windows Server 2012 R2 (or later)Mac: macOS X 10.13 (or later)LinuxSystem fan5-speed automatic fan controlSoftware utilityWindows/macOS: QNAP External RAID ManagerSupported File SystemsNAS storage (EXT4), external hard drive (EXT3, EXT4, NTFS, FAT32, HFS+, and exFAT*)*Purchase of an exFAT driver license from the License Center is required.QTS Storage Management FeaturesGeneral & External Storage ModeOverview device, disks, and RAID info and statusSupport for disk S.M.A.R.T. monitoringDetermine location of enclosure using LEDs and system speakersExternal RAID software configurationRAID rebuildRAID recoveryFirmware updateFormat partitionErase partition and deviceNAS Storage ModeThe storage pools and volumes in the expansion enclosures are configured via the QTS operating system.Volume and LUN snapshots - Snapshot ManagerSnapshot Cloning - Snapshot Replica - Snapshot VaultSupport for Windows Previous Versions (CIFS/SMB)Show less...Software utility FeaturesQNAP External RAID ManagerOverview device, disks, and RAID information and statusSupport for disk S.M.A.R.T. monitoringDetermine location of enclosure using LEDs and system speakersDesktop notifications for device alertsExternal RAID software configurationRAID rebuild - RAID rebuild speed customizationRAID recovery - Firmware updateNotifications when new firmware and application versions are availableSystem event logs for troubleshootingExport event logs to .csv file